08 toyota yaris 5speed LB

Work in progress? Car partially underway? If you want a spot to dedicate to the work this is where you'll want to go.
User avatar
Posts: 6120
Joined: Tue Jan 16, 2001 1:00 pm
Location: Greenwood, IN

Postby nismo » Wed Jun 25, 2008 4:20 pm

X-OvrDistortion wrote:you cut me deep that time....you cut me real deep.................

Did you use the safe word? That's what its there for. Remember, 'hurts so good' is okay, 'hurts bad' is not.

User avatar
Posts: 1691
Joined: Mon Jan 05, 2004 1:00 pm
Location: Germany

Postby 95Honda » Thu Jun 26, 2008 12:47 am

Glad to see you are using the right kind of power cable!

Marshall asked me how much it would be to fly to Idaho....
User avatar
Posts: 6120
Joined: Tue Jan 16, 2001 1:00 pm
Location: Greenwood, IN

Postby nismo » Thu Jun 26, 2008 10:38 am

I had a bunch of that 2/0 welding wire but I ran out :(

User avatar
Posts: 876
Joined: Sat Jan 03, 2004 11:39 pm
Location: Canada

Postby Nigel » Thu Jun 26, 2008 12:30 pm

nice looking job so far, keep it up along with the pics.

'03 S-dime ext. Cab.
Dropped 3" all around
Shadow billet grill
18" Beyern Type Five's in Hyper Silver
Nexen N3000 245/45ZR18 rubber
Eurolite clear tails
clear corners
Truxedo Truxsport Tonneau Cover

Alpine CDA-7998 source unit
Clarion SRS 1686 6.5" comp set up front
OZ Audio ME 12.4 in a 2 cube ported box at 34 Hz
JBL GTO 601.1 II Sub amp
JBL GTO 75.2 II comp. amp
12 sq. ft. Dynamat Extreme on roof
User avatar
Posts: 2891
Joined: Wed Dec 12, 2001 8:07 pm
Location: viginia beach, VA

Postby Member02 » Sun Jun 29, 2008 8:41 am

hmmm for some reason this thread makes me wanna add a thrid wheel to my motorcycle, incase it in a fiberglass cocoon and then add a stereo, likely resulting in an end result near 43mpg...

sometimes I just wish I could have a cup holder and listen to music while riding my motorcycle...

I second the motion to remove the rear seats in favor of showing off x-over/eq since few people use them anymore., of course the amp should be shown too.

that is a clean sintall
User avatar
Posts: 6829
Joined: Wed Jun 19, 2002 1:00 pm
Location: Eugene, OR

Postby TalNLnky » Fri Aug 22, 2008 11:20 pm

Looking like I won't have the help doing this install that I initially thought I would because my buddy works weekends, and I have weekends off.... and he lives 5hrs north of me.

SO...., might not get around to installing the Denon & 3-ways and glass work, and amp rack until spring/summer 09. New teaching job.... lots of work the first year. With this realization I decided to spend an afternoon and throw in something to get me through the coming months until I can complete the install.

So... here's the stats:

Deck: Stock
Fronts: Stock
Rears: disconected

Subs: Dual Tangband 740c 8" subs
Box: Ported 1.2cuft @ 28hz
Amp: Us Acoustics 2080. 80wx2@4ohm.
Subs are SVC4ohm wired series for an 8ohm load bridged on the amp... Thus giving a grand total of 80rms total/ 40rms per sub.

Sounds a lot better now. i've always loved these tangband subs, glad I didn't sell them before the move.

I only have one problem... I tried to tap into what I thought was the power antenna wire on the wiring harness... and use that as a remote turn on lead.... didn't work... anybody know what wire I can tap into so I don't have to use a toggle switch to turn my amp on?. Car is a Toyota 08 yaris hatch
You do not have the required permissions to view the files attached to this post.
[url=forum.carstereos.org/showthread.php?t=24643&highlight=porn]Father of Speaker porn[/url]
Mutha ****** 8's in my kicks!

"Don't stop I can feel it vibrating my chair!" - UPSTAIRS NEIGHBOR

"****, if cancelation is a problem, just stuff MORE in there" - JBLGEO

Novus Ordo Seclorum, The New Forum

Return to “Project Logs”

Who is online

Users browsing this forum: No registered users and 0 guests