Speaker Matching

General discussion for all questions based in the home audio/video world.
User avatar
punxworm
New Member
Posts: 364
Joined: Wed Mar 10, 2004 4:03 pm
Location: South Jersey
Contact:

Speaker Matching

Postby punxworm » Wed Nov 08, 2006 11:56 pm

This question may have a simple answer or a complicated one; it's a new realm for me so I'm not sure.
I've never really fooled around with home audio before, only ever car. I guess the answer might be the same for home as with car audio, but I'll ask anyway.
How would one go about matching a nice set of DIY speakers? Particularly in reference to using some different tweeters, possibly along the lines of ESL.

For example:
http://www.partsexpress.com/pe/pshowdetl.cfm?PartNumber=297-400&raid=46&rak=297-400

I have never heard anything but a normal dome tweeter. I've read the characteristics of other types of tweeters, but I'm not really if there was some outrageous rule of thumb that goes along with these types. Chances are, the answer is no, but if anyone has any insight into driver selection for a nice two-way setup with possibly exploring some unique tweeters, I'm all ears.

Thanks guys!
User avatar
Shooter61
Posts: 349
Joined: Wed Apr 27, 2005 11:43 am
Location: Iowa
Contact:

Postby Shooter61 » Thu Nov 09, 2006 8:22 am

Don't know much about DIY home audio, but I do know that your frontstage (FR C and FL) are what you want to in a sence blend together. Most of the time that will be done by having the same sounding tweeters throughout your frontstage. The idea is that the three channels blend into the sound of one.
Ryan
Show before go, can't lose your license for being too loud

CDA-9851
KCA-420-i
30 GB iPod Video
Kicker SX700.4
CDT EF 6.1 comp *Rear*
CDT HD 5.25 Braxial *Front*
Rockford Fosgate P400.2
2 Massive Audio PW10's
User avatar
eezip
New Member
Posts: 1009
Joined: Mon Dec 17, 2001 12:43 am
Location: Orange County, CA
Contact:

Postby eezip » Fri Nov 10, 2006 12:15 am

Different types of drivers [and not just tweeters] don't have to sound a certain way. If the response of one speaker matches another perfectly, then they will sound the same. And speakers could be vastly different but still have identical output. But some driver designs work better in certain applications and thus are identified with a certain sound. For most applications, a soft dome or hard dome will get you where you want to be. They are the most prolific and thus you have a better than average chance of getting community support and ending up with a speaker you'll be happy with and proud of.

Timbre matching is usually cornered by using the same tweeter for all channels. You'll read this time and time again in magazines and Shooter is confirming it. There's more to it than that, but it appears that matching tweeters are mandatory. Of course, the best matching would come from identical speakers with identical room interaction. Obviously, this isn't going to be possible. But matching speakers are a great starting point. Since you're talking about DIY speakers there shouldn't be any reason why you can't tweak the crossover a little bit to get the sound very balanced across the front trio. Time spent on the crossover and positioning should be able to get speakers with the same driver(s) and appropriate boxes to sound quite similar. My recommendation is to use the same speaker for all three front channels.

Hoe do we tie this together? Well, you can match any speakers together, but it's easiest pick drivers that complement each other. Start with tweeters - choose one that you like and them find mids to match them. Read reviews and go out and listen to find a tweeter or type of tweeter than you think sounds good and you can live with. Then let the games begin! It takes a long time for even experienced acoustic engineers to get a loudspeaker and crossover all dialed in - so be patient. I'm no expert with loudspeakers but I've had some fun experiments in the past and I get to see the development often so I have an idea of what goes on.

I'd imagine you know about the following sites but just in case here are some places which I go to or have gone to for speaker stuff. Some I haven't checked in a while so you're on your own:
http://www.madisound.com/
http://www.northcreekmusic.com/index.html
http://www.zaphaudio.com/
and you're already familiar with Parts Express.

Good luck man and hopefully someone with more experience can help you now and later. Atomic Fusion and 95Honda are some of the guys who I would really look to for speaker advice. There are plenty of other guys too, so please don't feel left out because I am ignorant :)
HT: Sony KV-27FS13 | Oppo DV-981HD | Denon AVR-2807 | 7x Cambridge MC100 | Acoustic Research ARPR1010 || Stereo: Dynaudio Audience 42 | Hales Concept 3 prototypes | wouldn't you like to know... :)

Home PC: Yamaha RP-U100 | B&W LM-1 | Mpyre 65x || Work PC: Yamaha RP-U100 | QSC AD-S32T | Sony MDR-V600
User avatar
Atomic Fusion
Posts: 6230
Joined: Fri Oct 19, 2001 11:00 am
Location: Earth

Postby Atomic Fusion » Fri Nov 10, 2006 3:15 pm

eezip wrote:Different types of drivers [and not just tweeters] don't have to sound a certain way. If the response of one speaker matches another perfectly, then they will sound the same


This is false. There are more aspects to how a speaker sounds than frequency response, and they are documented. Distortion, spectral decay, and so forth. Frequency response is a good indicator, but not the be all end all.


Some simple points -


Cone material -

Paper and poly have more neutral frequency responses and are easier to work with in a crossover. They typically have a wider useable frequency response. Their midrange detail is usually inferior to more exotic materials.

Aluminum, magnesium, carbon and kevlar often sound more detailed in the midrange, but because they are so stiff, the cones have breakup modes and extremely rough frequency response in the upper end. This is usually a moot point on tweeters, but is very important on midranges. These can be tamed, but more complex crossovers are required.

frequency response -

Check out actual frequency response plots]www.madisound.com[/url] and ask for some driver suggestions. I could give you some but I unfortunately don't have time at the moment. There are people there who can also design a crossover for you, which is substantially more in depth than it may seem at first glance. IMO, avoid planars, ribbons, and other alternative driver types until you are in the know a little more. A simple, 2-way design (either designed from scratch, or a kit design that someone has already come up with) will get you into the swing of things.

Adam
Found something better.
SIN's Freelance Female "Rear Entry" Super Hero
User avatar
eezip
New Member
Posts: 1009
Joined: Mon Dec 17, 2001 12:43 am
Location: Orange County, CA
Contact:

Postby eezip » Fri Nov 10, 2006 9:23 pm

Adam is absolutely right. What I intended to make clear was that if every single parameter matches between speakers/loudspeakers, even those parameters we can't [yet?] seem to measure, then they will sound the same. It did sound like I was specifically pointing to frequency response - sorry about that.

The zaphaudio link I sent discusses many of the problems inherent in certain types/materials. You can see what he has done to tame drivers and get a feel for how the crossover shapes the acoustics, as on some projects he offers alternate crossovers for given drivers in a given box. I don't know enough to see any problems with what he's done, so unless you hear otherwise I hope it's a good starting point. As is madisound, of course.
HT: Sony KV-27FS13 | Oppo DV-981HD | Denon AVR-2807 | 7x Cambridge MC100 | Acoustic Research ARPR1010 || Stereo: Dynaudio Audience 42 | Hales Concept 3 prototypes | wouldn't you like to know... :)



Home PC: Yamaha RP-U100 | B&W LM-1 | Mpyre 65x || Work PC: Yamaha RP-U100 | QSC AD-S32T | Sony MDR-V600
User avatar
punxworm
New Member
Posts: 364
Joined: Wed Mar 10, 2004 4:03 pm
Location: South Jersey
Contact:

Postby punxworm » Sat Nov 11, 2006 7:40 pm

amazing responses, thanks a lot guys
User avatar
ballstothewall
New Member
Posts: 109
Joined: Fri Apr 29, 2005 10:40 am
Location: Manhattan, Kansas

Postby ballstothewall » Sun Nov 12, 2006 2:44 pm

Wow, nice info.

Return to “Home Audio/Video”

Who is online

Users browsing this forum: No registered users and 0 guests